Note: 1. Only ship with LOTMAXX SC-10 SHARK. Not a single piece shipments.
2. Please choose the same color as your 3d printer. The unmatching color will be automatically modified when shipping.
Description:
Just tap the touch screen to activate the auto-leveling interface, the inductive sensor will probe the heated bed. It precisely measures the print surface's tilt, freeing you from the time-consuming and tricky manual process.
Laser Engraving
- Module Specifications:
No. |
Specification Name |
Parameter Description |
1 |
Laser irradiation distance(meters) |
>5000m |
2 |
Working time |
8000 hours (the module has 35% optical loss after focusing) |
3 |
Laser wavelength |
440-460nm |
4 |
Laser output power |
MAX: 1.6W |
5 |
Working voltage |
<6V, Standard: 4.8V |
6 |
Working current |
<1.5A, standard:1.2A |
7 |
TTL modulation |
Yes (make sure to input TTL level PWM closing signal) |
8 |
Analog switch |
Yes (there is a TTL/analog switch on the driver board) |
9 |
TTL signal |
0-5V input (0V OFF/5V ON) |
10 |
TTL control frequency |
0-20KHZ |
11 |
Duty Ratio |
Input 0-100% |
12 |
Cooling method: |
Metal radiator and silent fan |
13 |
Lens Material |
Glass |
14 |
Adjusting the focal length |
Manual adjustment,debugging focus <0.5mm |
15 |
Laser Size |
83*32*32mm |
16 |
Drive Board Size |
83*44*1.6mm |
17 |
Laser module size |
93*53*30mm |
- Engraving Material:
No. |
Supporting engraving materials |
Not supporting engraving materials |
1 |
Wood |
Metal |
2 |
Gray cardboard |
Transparent material |
3 |
Opaque plastic |
|
4 |
Leather |
|
5 |
Paint PCBA |
|
6 |
Bamboo |
|
7 |
Black plastic |
|
8 |
Rubber |
Note: In addition to the above engraving materials, such as fibers, fabrics, etc., you can try to engrave.
- Shipping list:
Accessories |
Quantity |
450nm *1.6mW laser module with analog/TTL driver board |
1 |
Goggles |
1 |